🛠️ How to mount the LP hooks
Wipe the wall
A damp cloth is enough. It removes dirt and dust so the adhesive strips stick properly.
Attach the strips to the hooks
Peel off the protective film and press the included adhesive strips onto the back of each hook.
Place the lower hooks
Set them about 20 cm apart, measured outer edge to outer edge. Press firmly.
Position the sleeve
Hold up the record sleeve and use it as a template to find the right height for the upper hook.
Press on the upper hook
Place it just above the sleeve so it holds it in place. Press for a few seconds.
✔️ Done!
Your records sit neatly and securely, and are easy to swap whenever you like.
Our own trick for a dead straight row
Hold a wooden batten against the wall and place the hooks along its edge. That gives you a straight row without measuring. The batten should be at least 1.5 metres, preferably 2, in any case long enough to span the whole row you are putting up. No batten at home? A piece of masking tape works just as well as a guide line. You do not have to do this, the hooks usually end up fine anyway, but it makes mounting a good deal easier.
